How to Send TRX: Step by Step, Bandwidth Fees, and Sending to a New Address

How to send TRX from a wallet or an exchange, why a TRX transfer uses bandwidth instead of energy, and why sending to a new address costs more.

Overtron Editorial

Short answer: to send TRX, open your wallet, pick TRX itself (not USDT), paste the recipient address that starts with the letter T, enter the amount, and confirm. A TRX transfer is a built-in TRON network operation: it uses no energy, only bandwidth. As long as your address still has its free daily bandwidth, you usually pay nothing on top of the amount you send. Only sending to a brand-new, not yet activated address costs noticeably more.

Sending TRX between two wallets on the TRON network
A TRX transfer only uses bandwidth. Energy is what USDT and other tokens need.

Sending TRX and sending USDT are two different operations

TRX is the native coin of the TRON network, while USDT TRC-20 is a token that lives inside a smart contract. When you send USDT, your wallet calls a contract function, and the network charges energy for it: about 64,500–65,000 units to an address that already holds USDT and roughly twice as much (~131,000) to an empty address. With no energy, the network burns TRX instead — around 6.5 TRX, or about 13 to an empty address.

A TRX transfer is simpler. It is a native network operation that does not run the virtual machine or touch any contract, so it only consumes bandwidth — the size of the transaction in bytes. The practical takeaway: renting energy to send TRX makes no sense, because it will not be used. You need energy when you send USDT; for TRX, bandwidth is enough.

How to send TRX in TronLink, step by step

  • Open TronLink and check that the right account and the TRON Mainnet are selected, not a testnet.
  • Tap TRX in your asset list and choose Send.
  • Paste the recipient address from the clipboard or scan the QR code. Do not type it by hand: one wrong character and the coins go to someone else.
  • Check the whole address, not just the first and last characters: scammers generate addresses with matching ends.
  • Enter the amount. If you are sending almost your entire balance, keep a little TRX for future fees.
  • On the confirmation screen, look at how much bandwidth or TRX the network will charge. A higher fee than usual is a reason to check whether this is a new address.
  • Confirm with your password. TRON produces a block every 3 seconds, so the transaction usually shows up in your history and on Tronscan within seconds.

How to send TRX from Trust Wallet

Trust Wallet works the same way: pick the Tron (TRX) asset, tap Send, paste the address, enter the amount, and confirm. The main trap here is look-alike assets. In a multichain wallet, TRX can also appear as a separate token on BNB Smart Chain. Send the TRX whose card says the network is Tron; otherwise a recipient with a TRON address will not see the coins.

TRX transfer fee: bandwidth instead of energy

Every activated TRON address gets 600 free bandwidth points per day, and the allowance recovers gradually. A TRX transfer takes a few hundred bandwidth points — less than a USDT transfer (≈345–360). So the free allowance is usually enough for at least one TRX transfer a day, and that transfer costs nothing beyond the amount you send.

Once the free allowance is used up, the network first draws on bandwidth you got from staking TRX, and if there is none, it burns a small fraction of TRX for the missing bytes. The rate is a network parameter described in the TRON resource model documentation; your wallet shows the exact amount on the confirmation screen. How the network prices other operations is covered in TRX fee: how much TRON charges per transaction.

Sending TRX to a new address: why it costs more

If the recipient address has never received anything, the account does not exist on the network yet. The first incoming TRX transfer creates it, and the network charges a separate one-time fee for creating the account. That is why your wallet shows a noticeably higher fee when you send to a fresh address. It is not an error or a hidden wallet charge; it is a network rule.

According to the TRON documentation, the account creation fee is 1 TRX plus the bandwidth of the transaction itself. The sender pays it, and only once: later transfers to that address follow the normal rules. There is an upside, too: sending TRX is the simplest way to activate a new wallet before you start receiving USDT on it. Why that matters is explained in how to activate a new TRON wallet.

How to withdraw TRX from an exchange

  • Withdrawal network. Choose TRX / TRON (TRC20). Some exchanges also let you withdraw TRX on other networks, such as BEP20; those coins will not arrive in TronLink.
  • MEMO or Tag. You do not need it for a personal wallet. If you are sending TRX to another exchange and its deposit page shows a MEMO field, fill it in, or you will have to sort out the credit through support.
  • Withdrawal fee. The exchange sets it, not the network, and you see it in the withdrawal form before confirming. Compare it with the amount: on small withdrawals it adds up.
  • Minimum amount. Every exchange has its own minimum TRX withdrawal; you cannot withdraw less.
  • Address whitelist. If it is on, you have to add and confirm a new address first, sometimes with a delay.
  • Test transfer. When sending a large amount to a new address, withdraw a small part first and make sure it arrives.

The network itself confirms a transfer in seconds, but the exchange may hold a withdrawal for review — anywhere from minutes to a few hours. If the exchange history says "processing," there is no TXID yet and it is too early to look for the transaction on-chain.

Sending TRX to another wallet: common mistakes

  • Wrong asset. Sending USDT instead of TRX, or TRX on BNB Smart Chain instead of the Tron network.
  • An address copied from your transaction history. Scammers send tiny transfers from look-alike addresses so you copy theirs instead of the real one.
  • Sending your whole balance. Then you have nothing to pay for bandwidth or energy, and your next USDT transfer will not go through.
  • Trying to send staked TRX. Coins staked for energy or bandwidth cannot be transferred until you unstake and the waiting period ends.
  • A contract address instead of a wallet address. The USDT token address or any other contract is not the recipient.
  • A missing MEMO when sending to an exchange whose deposit requires one.

One detail about staking: in Stake 2.0, TRX does not become available right after you unstake, only after a waiting period — 14 days, per the TRON documentation. Before any transfer, check the recipient using the rules in TRC20 wallet address: how to check it and avoid mistakes. A blockchain transfer cannot be reversed: only the owner of the receiving address can return TRX sent there by mistake.

Where to get TRX for transfers and fees

You can buy TRX on an exchange and withdraw it to your address, or swap USDT for TRX right in your wallet, through a bot, or at an exchanger — the options and their costs are compared in swap USDT to TRX. If you need TRX mainly to pay fees on USDT transfers, holding it just to burn is the most expensive route. It is cheaper to get energy for a specific transfer: you can buy TRON energy for the period you need, and then the TRX in your balance only covers an occasional bandwidth top-up.

How to check that your TRX arrived

Copy the TXID from your wallet or exchange history and open it on Tronscan. A successful transfer shows the status SUCCESS, the operation type is a TRX transfer, and you see the recipient address, the amount, and the bandwidth or TRX charged. If everything looks fine on-chain but the recipient does not see the funds, they are usually looking at the wrong network or account, or the exchange is still waiting for the required number of confirmations.

Summary

  • A TRX transfer only uses bandwidth; it needs no energy.
  • The free 600 bandwidth per day usually covers at least one TRX transfer at no extra cost.
  • Sending to a new address costs more because of the one-time account creation fee.
  • Withdraw TRX from an exchange on the TRON network and check the MEMO if you are sending to another exchange.
  • Paste addresses from a trusted source and check them in full: a transfer cannot be undone.

If you send USDT TRC-20 as well as TRX, you can get energy for each transfer in the Telegram bot @overtronbot — no staking and no TRX burned on fees.

Read also

FAQ

How much does it cost to send TRX?

If your address still has its free daily bandwidth, a TRX transfer usually costs nothing beyond the amount sent. Once the allowance is used up, the network burns a small fraction of TRX for the missing bandwidth. Sending to a new address costs the most, because the network adds a one-time account creation fee.

Do I need energy to send TRX?

No. A TRX transfer is a built-in network operation and only uses bandwidth. Energy is spent on smart contract calls, such as sending USDT TRC-20.

Why is the fee higher when I send TRX to a new address?

The first incoming transfer creates the account on the blockchain, and the network charges a one-time fee for that — 1 TRX plus the transaction's bandwidth, per the TRON documentation. Later transfers to that address follow the normal rules.

How long does a TRX transfer take?

TRON produces a block every 3 seconds, so a wallet-to-wallet transfer usually appears on Tronscan within seconds. An exchange withdrawal can be delayed on the exchange's side, and an exchange deposit may wait for the required number of confirmations.

Can I cancel a TRX transfer?

No. A confirmed blockchain transaction cannot be reversed. Only the owner of the receiving address can send back TRX that went to the wrong place, so check the address before you send.

Do I need a MEMO to send TRX to an exchange?

It depends on the exchange. If its TRX deposit page shows a MEMO or Tag field, include it in the transfer. A personal wallet such as TronLink or Trust Wallet does not need a MEMO.

Can I send staked TRX?

No. First unstake and wait for the waiting period to end — 14 days in Stake 2.0, per the TRON documentation. After that the TRX returns to your balance and can be sent.

How do I send TRX from Binance to TronLink?

Copy your TRX address in TronLink, open the TRX withdrawal on Binance, choose the TRX (TRON) network, paste the address, enter the amount, and confirm. A personal wallet does not need a MEMO. For the first withdrawal to a new address, send a small amount first.